Hi and thanks. Edge Bindings > set a leftclick to perform a certain action, say "show/hide gadgets" > then set a rightclick to perform another action on that same Edge. What happens here: the action "show/hide gadgets" is performed on any mouse click. AFAIR, if no action is assigned to leftclick, other clicks are no-action too.

In T5537#89944, @billiob wrote:

It could be made much smarter and send the correct amount of left/right when lines are wrapped (thinking about edits on long command lines).

I'll try to dig once I have more time

Thank You!!! :-)

hi guys, anyone please?... @devilhorns @stephenmhouston @raster

Hi and thanks.

@zmike Please!!! can you implement the #1 from above? just half an hour of your work... I'll reward, can do some testing or whatever is needed, just say

Yes it's fixed, thanks. I feel like a software designer or at least advisor now ;)

hi, no the apps never show the window up.

hi don't know about qt5 but gtk3 apps still don't work here on wayland. Fresh install e git + efl 1.18.0 on Arch. See below

WAYLAND_DEBUG=1 l3afpad
[2659437.090]  -> wl_display@1.get_registry(new id wl_registry@2)
[2659437.156]  -> wl_display@1.sync(new id wl_callback@3)
[2659437.387] wl_display@1.delete_id(3)
[2659437.428] wl_registry@2.global(1, "wl_compositor", 4)
[2659437.468]  -> wl_registry@2.bind(1, "wl_compositor", 3, new id [unknown]@4)
[2659437.537] wl_registry@2.global(2, "wl_subcompositor", 1)
[2659437.575]  -> wl_registry@2.bind(2, "wl_subcompositor", 1, new id [unknown]@5)
[2659437.634] wl_registry@2.global(3, "zwp_e_session_recovery", 1)
[2659437.674] wl_registry@2.global(4, "screenshooter", 1)
[2659437.716] wl_registry@2.global(5, "www", 1)
[2659437.752] wl_registry@2.global(6, "wl_shm", 1)
[2659437.792]  -> wl_registry@2.bind(6, "wl_shm", 1, new id [unknown]@6)
[2659437.979]  -> wl_shm@6.create_pool(new id wl_shm_pool@7, fd 8, 2304)
[2659438.344]  -> wl_shm_pool@7.resize(6912)
[2659438.551]  -> wl_shm_pool@7.resize(16128)
[2659438.875]  -> wl_shm_pool@7.resize(34560)
[2659439.483]  -> wl_shm_pool@7.resize(71424)
[2659440.621]  -> wl_shm_pool@7.resize(145152)
[2659444.620]  -> wl_shm_pool@7.resize(292608)
[2659447.781]  -> wl_shm_pool@7.resize(587520)
[2659454.769]  -> wl_shm_pool@7.resize(1177344)
[2659479.807] wl_registry@2.global(7, "wl_data_device_manager", 3)
[2659479.843]  -> wl_registry@2.bind(7, "wl_data_device_manager", 3, new id [unknown]@8)
[2659479.882] wl_registry@2.global(8, "wl_seat", 4)
[2659479.900]  -> wl_registry@2.bind(8, "wl_seat", 4, new id [unknown]@9)
[2659486.734]  -> wl_compositor@4.create_surface(new id wl_surface@10)
[2659486.767]  -> wl_surface@10.set_opaque_region(nil)
[2659486.777]  -> wl_surface@10.set_input_region(nil)
[2659486.832]  -> wl_data_device_manager@8.get_data_device(new id wl_data_device@11, wl_seat@9)
[2659486.900]  -> wl_compositor@4.create_surface(new id wl_surface@12)
[2659487.184]  -> wl_display@1.sync(new id wl_callback@13)
[2659487.315] wl_registry@2.global(9, "wl_shell", 1)
[2659488.042] wl_registry@2.global(10, "xdg_shell", 1)
[2659488.207]  -> wl_registry@2.bind(10, "xdg_shell", 1, new id [unknown]@14)
[2659488.798]  -> xdg_shell@14.use_unstable_version(5)
[2659488.821] wl_registry@2.global(11, "wl_output", 2)
[2659488.843]  -> wl_registry@2.bind(11, "wl_output", 2, new id [unknown]@15)
[2659488.868]  -> wl_display@1.sync(new id wl_callback@16)
[2659488.888] wl_registry@2.global(12, "zwp_linux_dmabuf_v1", 1)
[2659488.910] wl_callback@3.done(72)
[2659489.368] wl_display@1.delete_id(13)
[2659489.392] wl_display@1.delete_id(16)
[2659489.405] wl_seat@9.capabilities(7)
[2659489.418]  -> wl_seat@9.get_pointer(new id wl_pointer@3)
[2659489.481]  -> wl_seat@9.get_keyboard(new id wl_keyboard@17)
[2659489.521]  -> wl_seat@9.get_touch(new id wl_touch@18)
[2659489.575] wl_seat@9.name("default")
[2659489.586] wl_callback@13.done(72)
[2659489.599] wl_output@15.geometry(0, 0, 340, 190, 0, "eDP-1", "unknown", 0)
[2659489.657] wl_output@15.scale(1)
[2659489.670] wl_output@15.mode(3, 1366, 768, 60000)
[2659489.702] wl_output@15.done()
[2659489.718] wl_callback@16.done(72)

hi indeed I think these are separate issues as I had simotek's bug on one of my laptops too, but not on the other.

not sure how this could be the same issue since in simotek's bug there seem to be placeholders - blue dots - but just the icons are missing, while in my case IBar doesn't see the applications at all, save for terminology....? but I'll try installing fresh config and git on my other laptop to see whether it be the same

https://www.enlightenment.org/ss/e-57d15dbdebd8b1.58658857.jpg
this is how it looks.
anything else needed?

hi I am not about the icons. I dont see ty icon either, but the blue dot is there. Unlike with other apps.

thanks. Still ibar only shows terminology here.

e git, efl 1.18.0

Yes pardon me, but alsa support doesn't work fine at all, even after this commit.

1. Open mixer-gadget-popup and set volume to 89%. Close the popup. Scroll over the gadget to max out the volume. Now open alsamixer and check Master. It's at 97%.
2. The fact that this very gadget allows going over 100% in alsa. You max it out then go down... it's not going. Keep scrolling. Poor experience... (I mean I requested this very feature myself and it probably is very useful, but in pulseaudio. In alsa it sucks.

On the other hand, if we open the proper Mixer, it seems to have neither of the above flaws. So maybe code from there could be used in gadget?... And yes I do appreciate, that we at least have alsa support - gnome just pulls pulseaudio and is done with it, as far as I remember. But then if we have it, make it at least useable. Seeing this apparently simple, and commited patch, waiting half a year to be pushed, and seeing these other bugs, and all the other bug E has, one may get unpatient and discouraged to report anything.

e 21.1

guys any chance this gets into E Master or should we consider alsa support a bitter joke... for god's sake

thanks :)

Hi, on efl 1.17 options -F, --fullscreen do work. Edited the task description.

yes @simotek, but what I am trying to fix here is my distro problem, I'll admit. Arch repo updates E, EFL only every ~5 point releases, and with long delay... The guy just don't have time... Somebody else has stepped up and tried to maintain a similar efl-fresh in AUR with frequent releases, but it was removed for doubling the official repo. I am just trying to find a solution here...

No @simotek I just meant what I wrote ;)
@raster yeah unfortunately E, EFL updates to core are so infrequent... Anyway your solution seems logical indeed

In T4441#67806, @raster wrote:

that's what we have as stable. use that.

Hi just a few DESIGN ideas of mine, hope you like any.

Hi and thanks a lot. I am waiting for EFL 1.18 to hit Arch Repo then I will give it a go.

hi, haven't tried e21 yet.

ok I will give it a try.

hi again, I just tried again on a live system and neither QT5 nor GTK3 apps work.
efl and e are GIT as of this very moment.
system is about one-month-old manjaro live-cd with only wayland updated to the latest 1.11 which is required by efl/e
hardware is i3 plus some cheap nVidia. however, no nvidia package is installed so I am assuming it to be nouveau.
following are the results from running some apps with WAYLAND_DEBUG=1. the results are similar no matter whether rendering is set to Software or GL.

Hi and sorry for the delay. Unfortunately I had switched back to E stable and lost the non-working git configuration.

present in git again as of today

yes, fixed now in git.

Shite :-/ Thanks for the comment anyway.

Thanks. somehow it is now good with efl and e updated.

Thanks!

Hi and thanks. What can you suggest then? Should I erase some config files?...

Hi and thanks

Hi and thanks. Well I never need it. Once #3 is implemented, it will be even less needed.

not sure guys how you see it but what I personally see as a decent ALSA mode, is that Mixer displays all the channels that alsamixer does, so Master, PCM, speaker, etc